EPOQU can be
used with oil temperature up to 120°C continuously without failure while the conventional
hose at just 100°C.
Continuous Service
At 120°C
EPOQU can serve with a bending radius
2/3 smaller than that of a conventional rubber hose. The shorter hose
assembly allows to design a compact hydraulic circuit and benefits the
cost savings from it.
Smaller Bending
radius
EPOQU is
designed to have high flexibility and thus it require just 2/3
of the force necessary to bend compared with conventional rubber hose to the same
bending radius. Thus, EPOQU allows easy handling and speedy installation.
Easy Installation
EPOQU
successfully passes 1,000,000 impulse cycles at oil temperature 120°C.
Such performance exceeds JIS and SAE standards.
(SAE
Pressure Waveform)
Outstanding
Fatigue Resistance and Durability
(
Tested to 1,000,000 Impulse Cycles )
(Impulse
Pressure Test Conditions)
Test
Pressure : SAE flat waveform (Recommended working
pressure x 133%)
Oil
Temperature : 120°C
Test
Fluid :
#30 oil or the equivalent
Bending
Radius : Minimum bending radius given in the catalogue
